CE-1A Buckle Tester for Can and Easy Open End Lid

Item No.: YCE-1A-4367

CE-1A tester can test the buckle of ends and the bottom of cans, and "missile" of easy open ends, round lids and irregular shaped lids.

Product parameters
Product Name:	Buckle Tester for Can and Easy Open End Lid
Model Number:	CE-1A
Brand:	CYI-C
Minimum Order Quantity:	1 buckle tester for can and easy open end
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	20 buckle testers for can and easy open lid per month
Place of Origin:	China

INQUIRY

Description

CE-1A tester can test the buckle of ends and the bottom of cans, and "missile" of easy open ends. This buckle tester can measure round lids and irregular shaped lids.
1. Easy-open ends compression strength test: detect the pressure when the lid is deformed.
2. The pressure strength test of the bottom of cans: to detect the pressure when the bottom of the can (especially the bottom of the two-piece aluminum can) is deformed.
3. "Missile" test: "Missile" refers to the fact that when consumers open canned carbonated beverages, if the metal piece of the easy-open end fly out quickly, it is easy to cut consumers. The CE-1A buckle tester for can and easy open end can imitate the situation when consumers open canned carbonated beverages. Under the condition of 0.6MPa pressure, the pull ring of the easy-open end is quickly pulled up by the pull hook. If the metal piece in the pull ring and the ring-shaped score line fly up, it is unqualified.

Features of CE-1A Buckle Tester for Can and Easy Open Lid
• Touch-screen PLC controlled system
• Pressing speed is adjustable and the pressure curve can be set
• Built-in the “pneumatic pressure-increasing valve”, can change the pressure to double or triple level than the input pressure.
• High accuracy
• Test point for calibration
• Multi- safety design
• Mechanical overload protection
• Data output.

Parameters of CE-1A Buckle Tester for Can and Easy Open End
• Equipment Name: Buckle tester for can and easy open end lid
• Equipment Model: CE-1A
• Measure Range: 0-900 KPa (0.9MPa)
• Resolution: 1KPa
• Accuracy: 0.5% F.S.
• Data Output: RS232C
• Power Supply: 115/230V, 50/60Hz
• Compressed Air Supply: 0.5L/min, 0.5MPa
• Dimensions (length × width × height, mm): 520 x 460 x 750
• Weight: 50kg

-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. Often Used Food Can Lid Testing Instruments and Equipment: include testing instruments for the structure and compressive strength of food can lids and anticorrosive coating layers.
2. PT-40 Pop and Tear Tester Gauge for Easy Open Ends Lids: is used to measure the pulling force required to open the lid, has calibration function and is easy to operate.
3. LT-20 Buckle and Leak Tester for Easy Open Ends Lids: Has two test functions: the easy open ends compressive strength test and leak test, round lids and irregular shaped lids.
4. SM-30 Cans Lids Testing Instrument - Easy-open Ends Score Residue Laser Meter: is a microscope testing equipment, uses laser precise measurement technology to measure the score residue of can easy-open ends. The measurement data is accurate, reliable, and reproducible.
5. SM-40 Cans Lids Testing Instrument - Easy-open Ends Score Residue Meter: is a microscope testing equipment, used to measure the score depth of easy-open can lids ends - the remaining amount of score.
6. MJ-1C Cans Lids Testing Instrument - Easy Open Ends Rivet Meter: is a microscope testing equipment, used to measure the rivet structure and size of the pull ring (tab score) in the can easy-open ends.
7. LS-10 Cans Lids Precise Cutting Machine - Easy Open Ends Low Speed Saw: is used to cut the rivet of easy-open end to observe whether the structure of rivet meets the quality requirements.
8. Necessary Food Cans and Lid Coating Quality Testing Equipment: These instruments include testing equipment for the anticorrosive coating layer of food cans and lids and metal sheets.
9. CE-10 Automatic Digital Enamel Rater for Metal Can Lids: CE-10 digital enamel rater is used to test the degree of perforation of the anticorrosive coating layer in the can lid, is fully automated testing equipment.
10. ER-10 Ten Stations Digital Enamel Rater for Can Metal Lids: is used to test the degree of perforation of the anticorrosive coating layer in can lid, can test 10 metal lids at the same time. It is an efficient can lid testing equipment.
11. ER-4 Multifunctional Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the anti-corrosion coating layer of metal cans and lids. Various containers, lids and tinplate anticorrosive coatings can be inspected after changing a variety of testing molds and brackets.
12. ER-2 Multi-station Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the coating layer of metal cans and lids, it can inspect two containers at the same time. The cans and lids can be round or irregularly shaped.
13. TG-3 Coating Thickness Gauge for Metal Sheet or Cans or Lids: uses electromagnetic induction to measure the coating thickness on metal sheets, cans or lids. The measurement value of this instrument is calculated with the coating weight per unit area (g/m²). When equipped with “Hover Probe”, the gauge can measure the coating thickness of metal sheets. When equipped with can body testing clamp, it can test the coating thickness of can body. Use a standard calibration coating plate (sample with known weight, g/m²) to calibrate the gauge.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the equipment performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The Product descriptions may be modified at any time without notice.
•The final performance and parameters of the product are determined by the contract signed by the customer at the time of order.
-------------------------------------------